STEP-BY-STEP

Preparation Method | Recommended

✦ Perform nail preparation, preferably using the Combined or Russian Manicure technique; pusher, bit (clean with drill), cut cuticle (scissor or nipper) and file. Clean the nail with alcohol (70%).

✦ Apply The Bonder "Primer" to give greater adhesion to our Flexy Base. (This step is optional, our Flexy Base has great adhesion on its own).

✦ Apply a small amount of our Flexy Base covering most of the nail, you can use a 5mm/7mm brush for the cuticle area. Cure for 60 seconds in the LED lamp.

✦ Apply again an amount of our Flexy Base, like a drop.

✦ Perform leveling. Flip the client's nail down allowing our entire base to reach the middle. Flip your nail up and the base will level itself.

✦ Check the reflection of light on the nail, what is known as the "blick". If this is perfect, cure for 60 seconds in LED lamp, preferably 48W or more.

✦ If you feel the need to file the Flexy Base you should do it in this step. Remember to clean the nail with alcohol (70% or more) before and after to avoid contamination when applying gel color. If you do not have to file, go to step 9.

✦ Apply the gel color and make your art.

✦ Apply the Classy Glassy "Top Coat", cure for 60 seconds in an LED lamp, preferably 48W or more.

Disclaimer: The preparation method may vary depending on the country, nationality or education received. The steps explained above are a help guide for the application of our Flexy Base. If you work the Russian or Combined Manicure in another way, feel free to do it the way you learned. These are not established or mandatory steps.